Product brief introduction
Grinding fluid ES-756WH hard alloy is mainly composed of lubricant, antirust additive, stabilizer and other components, all kinds of grinding is widely used in the cemented carbide, with lubrication, anti-rust, anti-corrosion, cooling effect, the lubrication of good, short-term anti-rust effect.
●Lubrication: can extend tool life, improve processing brightness.
●rust: have good anti-rust capability for steel and cast iron parts, can completely replace the process of rust.
●when using diluted 20 times, is very economic.
●security: This product on the iron parts and skin machine, steel, no corrosion, meet the requirements of environmental protection, no pollution of the environment.
Mainly used for lubricating and radiating cemented carbide in the grinding process and can rust preventive.
Method of use
●Join ES-756WH cemented carbide tool grinding fluid to dress grinding fluid tank, then add 20 times water mixing evenly, can be put into use.
●in use, grinding fluid will become dirty because of growing pollution, excessive iron deposition should be timely cleaning, cutting fluid if black or odor should be updated according to the number of cutting emissions, workload, cutting fluid every 3 months or so to be discharged to update a, application of liquid ES-756WH hard alloy grinding fluid supplementary usually supplement.
●emission update if cutting groove bottom very dirty, should be promptly cleaned up, in order to avoid the pollution of new liquid.
Matters needing attention
●Please at 0-40 ℃indoor storage.
●with a good if it is not used for a long time in the machine, more than 3 months should be replaced.
●summer high temperature, grinding fluid use cycle and antirust period than other season is short, please use.
25KG/ barrel; 200KG/ barrel